Skip to content
Incident Response Plan Templates

StepsChecked 16 November 2026

Incident response plan in 6 steps: the SANS model

Open the free templateRead the method

What are the six steps of incident response?

The six steps are preparation, identification, containment, eradication, recovery and lessons learned. The SANS Incident Handler's Handbook says it limits itself to the six phases of the incident handling process and notes that each phase, from preparation to lessons learned, is best followed in sequence because each builds on the other.

What are the six steps of incident response?
StepPurpose in the handbookLeaves behind
1 PreparationReady the team: policy, response plan, communication, documentation, team, access control, tools, trainingPlan, contact list, tools, drilled team
2 IdentificationDetect and decide whether a deviation is an incident, and its scopeDeclared incident, evidence, notified team
3 ContainmentLimit damage: short-term containment, system back-up, long-term containmentStopped spread, forensic image
4 EradicationRemove and restore affected systems, usually by reimaging, and improve defensesClean systems, patched weakness
5 RecoveryReturn systems to production carefully, test, monitor and validateSystems back, monitored
6 Lessons learnedComplete documentation and reviewReport, meeting, improvements

What does preparation include in the SANS model?

The handbook lists eight elements: policy, response plan or strategy, communication, documentation, the response team, access control, tools and training. It suggests a "jump bag" holding everything responders need and drills at regular intervals.

Template sections 1 to 4, 12 and 14 cover the same ground.

How quickly should lessons learned happen?

The handbook says the lessons learned meeting should be held as soon as possible and gives a rule of thumb of within two weeks after the incident, with a short report and an executive summary. The template's review section uses a 10 business day default that you can change.

Where does this model sit beside NIST?

NIST SP 800-61 Rev. 3 maps the older four-phase NIST model to CSF 2.0 Functions. The SANS model splits NIST's "containment, eradication and recovery" phase into three. See NIST versus SANS.

Sources

  1. SANS Institute, Incident Handler's Handbook (21 February 2012)
  2. NIST SP 800-61 Rev. 3, full text (April 2025)

Last reviewed 16 November 2026. Each source above was read that day.