# Incident response steps: NIST vs SANS compared

Steps, read 16 November 2026

**The short answer.** NIST SP 800-61 Rev. 2 used four phases, Rev. 3 (April 2025) maps response to the six CSF 2.0 Functions, SANS uses six phases and CISA uses five. They describe the same work. This page, read on 16 November 2026, sets them in one table and says how to choose.

## How do the NIST and SANS incident response steps compare?

NIST and SANS describe the same work with different cuts. The older NIST model has four phases; SANS has six because it splits containment, eradication and recovery. NIST SP 800-61 Rev. 3 replaced the circular model with the six CSF 2.0 Functions: Govern, Identify, Protect, Detect, Respond and Recover.

| Work | NIST Rev. 2 (previous) | NIST Rev. 3 CSF 2.0 | CISA playbook | SANS handbook |
| --- | --- | --- | --- | --- |
| Get ready | Preparation | Govern, Identify, Protect | Preparation | Preparation |
| Find and decide | Detection and analysis | Detect | Detection and analysis | Identification |
| Stop the spread | Containment, eradication and recovery | Respond (RS.MI-01) | Containment | Containment |
| Remove the cause | Containment, eradication and recovery | Respond (RS.MI-02) | Eradication and recovery | Eradication |
| Restore service | Containment, eradication and recovery | Recover | Eradication and recovery | Recovery |
| Learn | Post-incident activity | Identify: Improvement (ID.IM) | Post-incident activities | Lessons learned |

How do the NIST and SANS incident response steps compare?

## Why did NIST change the model?

NIST Rev. 3 says that when the earlier model was written incidents were relatively rare and quick to resolve, but today they occur frequently and recovery often takes weeks or months. It says incident response is now a critical part of cybersecurity risk management and that lessons should be shared as soon as they are identified, not delayed until after recovery.

The practical point: improvement runs through all the work and does not wait for the end.

## Which model should you choose?

Use the CSF 2.0 layout if your organization already reports against the NIST Cybersecurity Framework; the [NIST layout template](/templates/incident-response-plan-template-nist/) groups the plan that way. Use the six SANS steps for team training and checklists, and the five CISA steps if you work with federal agencies.

NIST advises organizations to use the lifecycle model that suits them best. Any of the models can sit behind the same plan text.

## Related pages

- [Incident response steps: the order and who does what](/steps/)
- [Free incident response plan template](/)
- [The containment step of incident response](/steps/containment-step/)
- [Incident response plan in 6 steps: the SANS model](/steps/incident-response-plan-6-steps/)
- [What is the correct order of incident response steps?](/steps/correct-order-of-incident-response-steps/)
- [Incident response plan: what it contains and how to build one](/plans/)
- [Incident response playbook: what it is and how to build a library](/playbooks/)

## Sources

- NIST SP 800-61 Rev. 3, full text (April 2025): https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-61r3.pdf (read 16 November 2026)
- SANS Institute, Incident Handler's Handbook (21 February 2012): https://www.sans.org/white-papers/33901/ (read 16 November 2026)
- CISA, Cybersecurity Incident & Vulnerability Response Playbooks (November 2021): https://www.cisa.gov/sites/default/files/2024-08/Federal_Government_Cybersecurity_Incident_and_Vulnerability_Response_Playbooks_508C.pdf (read 16 November 2026)

Last reviewed 16 November 2026. Canonical: https://incidentresponseplantemplates.com/steps/incident-response-steps-nist-vs-sans/
